供應催化劑載體脫硫活性炭 載銀電鍍脫硫活性炭

脫硫活性炭外觀：

? ? 脫硫活性炭為黑色柱狀

脫硫活性炭性能：

? ? 本產品選用優質無煙煤為原料，采用先進工藝精制加工而成。有孔隙發達，比表面積大，吸附能力強，機械強度高，易反復再生，造價低等優點。

脫硫活性炭型號：

? ? 活性碳的材質總分為兩大類，一 木質活性碳、二 煤質活性碳，活性碳生產法有兩種，一種是物理法，一種是化學法，兩種材質類活性碳有很多種規則和型號，顆粒、圓柱狀、圓球狀、粉末狀、片狀、蜂窩狀等，活性碳顆粒可按規格來加工。

脫硫活性炭用途：

? ? 廣泛用于冶金、載銀、電鍍、輕工、石化、食品、醫藥、印染、味精、油脂脫色、溶劑回收、催化劑載體、空氣凈化、水處理、三聚氰氨、糖用、液相用、清塔、吸油、各種精脫硫等。對氣體與液體的除臭、除毒、脫色有很好的效果。

脫硫活性炭技術指標：

分析項目

測試數據

分析項目

測試數據

碘值

機械強度

比表面積

水份

充填密度

0.45-0.55/cm3

PH值

脫硫活性炭規格：

? ? ?1.0mm1.5mm3.0mm 4.0mm 6.0mm 8.0mm 10.0mm其它規格可隨用戶需求調節。

脫硫活性炭包裝：

? ? ?小包：25公斤裝，大包：噸袋。塑料編織袋外加內襯，產品應存放在室內干燥處。

脫硫活性炭注意事項：

? ? ?1、活性炭在運輸過程中，防止與堅硬物質混狀，不可踩、踏，以防炭粒破碎，影響質量。

? ? ?2、儲存 應儲存于多孔型吸附劑，所以在運輸儲存和使用過程中，都要**防止水浸，因水浸后，大量水充滿活性空隙，使其失去作用。

? ? ?3、防止焦油類物質 在使用過程中，應禁止焦油類物質帶入活性炭床，以免堵塞活性炭空隙，使其失去吸附作用。有除焦設備凈化氣體。

? ? ?4、防火 活性炭在儲存或運輸時，防止與火源直接接觸，以防著火、活性炭再生時避免進氧并再生徹底，再生后必須用蒸汽冷卻降至80以下，否則溫度高，遇氧，活性炭自燃。

寧夏華陽活性炭有限公司

劉德財

座機：

郵箱：

228****243@qq.com

網址

This product selection of high quality anthracite as raw materials, the use of advanced technology refined processing. Developed pore, large specific surface area, strong adsorption capacity, high mechanical strength, easy to repeated regeneration, low cost and so on.

Activated carbon material total is divided into two major categories, a wooden activated carbon, coal activated carbon and activated carbon production method has two kinds, one is physical method, a kind of is chemical method, two kind of activated carbon materials have many kinds of rules and model, particles, cylindrical, spherical, powder, flake, cellular and granular activated carbon can be processing according to specifications.

Widely used in metallurgy, silver, electroplating, light industry, petrochemical, food, medicine, printing and dyeing, MSG, oil decolorization, solvent recovery, catalyst carrier, air purification, water treatment, melamine, with sugar, liquid phase, clear tower, oil, all kinds of fine desulfurization. The gas and liquid deodorant, in addition to poison, the decolorization has a very good effect.

4.0mm 6.0mm 8.0mm 10.0mm 1.0mm1.5mm3.0mm other specifications can be adjusted with the user requirements.

Package: 25 kg, bags: tons of bags. Plastic woven bag with inner liner, the product should be stored in the indoor dry place.

1, activated carbon in the transport process, to prevent mixing with the hard material, can not be stepped on, to prevent carbon particles broken, affecting the quality of.

2, storage should be stored in the porous adsorbent, so in the process of transportation storage and use, must absolutely prevent flooding, due to flooding, a large number of water filled with active space, so that it lost its role.

3, to prevent the use of tar substances in the process, should be prohibited tar substances into the activated carbon bed, so as not to plug the gap of activated carbon, so that the loss of adsorption. Had better clean gas in addition to coke equipment.

4, fire activated carbon in storage or transportation to prevent direct contact with fire, in order to prevent fire, activated carbon regeneration to avoid into oxygen and complete regeneration, regeneration must be steam cooling down to 80 DEG C below, or high temperature, in case of oxygen, activated carbon combustion.

寧夏華陽活性炭有限公司

劉德財

座機：

郵箱：228****243@qq.com

網址