?
高鋁球簡介
?
? ? ? 高鋁球是氧化鋁球的一個類別，由于其氧化鋁含量**而被簡稱為高鋁球。高鋁球根據氧化鋁含量又可細分為90、92、95、99等系列。高鋁球由于其具有高強度、高硬度、高耐磨性，比重大、體積小、耐高溫、耐腐蝕、無污染等**特性而被廣泛的運用于不**型的陶瓷、瓷釉、玻璃、化工等等工廠的厚硬材質精加工和深加工。以92
含量的高鋁球為例，其比重應該達到3.60以上，氧化鋁含量達到91.5以上，含鐵低。同樣的原料，同樣的配方，同樣的燒成溫度下，原料研磨后的粉料細度越小，則比重越高，耐磨性越好。?
高鋁球指標
?
<性能指標/產品
90系列
92系列
95系列
99系列
Al2O3
90
92
95
99
Fe2O3
0.3
0.25
0.15
0.1
吸水率
0.8
0.8
0.8
0.8
體積密度g/cm3
2.8
3.0
3.1
3.2
棧積密度g/cc3
1.7
1.9
2.0
2.1
高鋁球用途
?
? ? ? 高鋁球使用者以陶瓷廠為主，目前有數據顯示，使用鵝卵石 10
高鋁球研磨稀泥，對比只用鵝卵石，能縮短15的研磨時間；使用中鋁球 30高鋁球研磨稀泥，對比只用中鋁球，能縮短30左右的研磨時間，單純以節省下來的電費計算，大概2年時間就能把因為使用高鋁球而高出的成本"省"回來。有報告顯示，球磨機用高鋁球高鋁襯磚代替中鋁研磨陶瓷原料，球石損耗不到中鋁球的三分之一，研磨時間縮短20，產品質量更加穩定，而且高鋁產品使用時間更長，不需經常更換球襯，整體使用性價比更高。用高鋁球研磨原料，不僅能節省電費，提高產量，而且提高機械使用效率，對機械設備有很大的保護作用。?
偃師市盈昌耐火材料有限公司
?
廠? 址：偃師市城關鎮興隆街
劉曉穎
手? 機：
Q??? Q：334****076
郵? 箱：334****076@qq.com
?
產品
?
廠區
Introduction to high alumina ball
High alumina ball is a category of alumina ball, which is referred to as high alumina because of its high alumina content. High aluminum ball can be divided into 90, 92, 95, 99 and other series according to the content of alumina. High alumina ball since it has high strength, high hardness, high wear resistance, than the big, small volume, high temperature resistant, corrosion resistance, no pollution and other excellent properties and is widely applied to different types of ceramic, enamel, glass, chemical industry and so on thick hard material finishing and deep processing of the factory. In the case of high alumina ball with 92 content, the proportion should reach more than 3.60, and the content of alumina reached 91.5 or higher, with low iron content. The same raw material, same formula, the same cooking temperature, the smaller the powder of the raw material after grinding, the higher the proportion, the better the wear resistance.
?
High alumina use
High alumina ball users are mainly ceramic factories. Currently, there are data showing that the use of pebble 10 high alumina ball is used to grind the slime, which can shorten the grinding time by 15. Using chinalco 30 alumina ball 35 mm grinding of mud, compared with chinalco ball, can shorten the grinding time of around 30, only to save electricity, about 2 years can make the higher costs by using high alumina ball back "province". Reports show that ball mill with high alumina ball high alumina lining brick instead of grinding ceramics raw material of aluminum, stone loss less than one third of the aluminum ball, ball milling time shortened by 20, more stable product quality, and high alumina products use longer and often does not need to change the ball line, the overall use of more cost-effective. Using high alumina ball to grind raw materials, not only can save the electricity bill, increase the output, but also improve the mechanical use efficiency, has a great protective effect on the mechanical equipment.
?
偃師市盈昌耐火材料有限公司
?
廠? 址：偃師市城關鎮興隆街
劉曉穎
手? 機：
Q??? Q：334****076
郵? 箱：334****076@qq.com
?
中國耐火材料網
公眾號
在線客服